Features
Multipoint Hot Water System for Mixer Tap System
For 1 Long Bath or 3 Normal Shower / 1 Rain Shower 10” or 2 Rain Shower 6”
Capacity 68L ; 15.0 Imp. Gallons
Power Rating 3.0kW ; 240V
Hot Water Up to 70°C
Rust-Free Stainless Steel Heating Element & Tank
HE Energy Saving Technology ; Save Energy 20%
(Available for Model JH68HE only)
High Density CFC Free Polyurethane Insulation Foam
for Long Lasting Hot Water
Accessories
Universal Mounting Ring Bracket for Universal Mounting
Mounting Ring Bolts
Safety
Pressure Relief & Drain Valve
Thermostat Safety Cut-Off at 70°C
Thermal Cut-Out at 95°C
Ariston ANDRIS SLIM RS Electric Storage Water Heater:
-Durable copper heating elemen
-Titanshield technology for best tank protection with titanium enameling and enhanced Mg anode.
-Accurate temperature indication to keep water temperature always under control.
Instant Heater with built in pump for increase water pressure.
Paired with Rainshower set
WEIGHT 2 kg
POWER RATING 3.3kW, 230V a.c 50Hz
INLET & OUTLET WATER CONNECTION Ø15mm (1/2" BSP)
MINIMUM WATER FLOW RATE 2L/Min
RECOMMENDED WATER FLOW RATE 4-6L/Min
PERMISSIBLE INLET WATER PRESSURE 0.1-0.3 MPa
RECOMMENDED INLET WATER PRESSURE 0.1 MPa
DIMENSION 236 x 413 x 95mm
WEIGHT 1.7kg
Features
Multipoint Hot Water System for Mixer Tap System
For 1 Normal Shower and 1 Wash Basin / 1 Rain Shower 6”
Capacity 38L ; 8.4 Imp. Gallons
Power Rating 3.0kW ; 240V
Hot Water Up to 70°C
Rust-Free Stainless Steel Heating Element & Tank
HE Energy Saving Technology ; Save Energy 20%
(Available for Model JH38HE only)
High Density CFC Free Polyurethane Insulation Foam
for Long Lasting Hot Water
Accessories
Universal Mounting Ring Bracket for Universal Mounting
Mounting Ring Bolts
Safety
Pressure Relief & Drain Valve
Thermostat Safety Cut-Off at 70°C
Thermal Cut-Out at 95°C
Features
Multipoint Hot Water System for Mixer Tap System
For 2 Normal Shower / 1 Rain Shower 8” / 1 Rain Shower 6” or 1 Wash Basin
Capacity 56L ; 12.3 Imp. Gallons
Power Rating 3.0kW ; 240V
Hot Water Up to 70°C
Rust-Free Stainless Steel Heating Element & Tank
HE Energy Saving Technology ; Save Energy 20%
(Available for Model JH56HE only)
High Density CFC Free Polyurethane Insulation Foam for Long Lasting Hot Water
Accessories
Universal Mounting Ring Bracket for Universal Mounting
Mounting Ring Bolts
Safety
Pressure Relief & Drain Valve
Thermostat Safety Cut-Off at 70°C
Thermal Cut-Out at 95°C
Features
Multipoint Hot Water System for Mixer Tap System
For 2 Normal Shower or 1 Rainshower 8”
Capacity 50L ; 11.0 Imp. Gallons
Power Rating 3.0kW ; 240V
Hot Water Up to 70 C
Temperature Display & Control Between Low, Med and High
Rust-Free Stainless Steel Heating Element & Tank
Highest Density CFC Free Polyurethane Insulation Foam
for Long Lasting Hot Water
Accessories
Wall Bracket For Mounting
Mounting Ring Bolts
Safety
Pressure Relief & Drain Valve
Thermostat Safety Cut-Off at 70 C
Thermal Cut-Out at 95 C
Dimensions: 287 x 674 x 278 mm(XS20), 330 x 760 x 319mm(XS30)
Capacity: 20L/30L
Weight: 13kg/17kg
Warranty (Manufacturer’s T&C’s Apply): Tank: 8 Years, Parts: 2 YearsFeatures:
New sleek and sophisticated curved-look design, with glossy and matte finishing
RheemGlas™ virtuous enamel glasslining coating on inner tank for added protection against corrosion to extend lifespan of inner tank
Enjoy more hot water and longer showers with exclusive RheemHot™ Diffuser
Retain heat in inner tank longer and shorten heating time with RheemFoam™, a high-quality polyurethane foam
High quality RheemHD+™ sacrificial anode rod to provide additional protection for inner tank against corrosion, helping to ensure years of worry-free performance
Safety cut out in case of abnormal conditions to prevent scalding
Durable and long lasting incoloy heating element to provide you with hot showers for many years
Single weld line on the inner tank to reduce points of vulnerability and minimize of water leakage risk by over 67%
Pressure relief valve to prevent excessive build-up pressure in inner tank
Slim and sleek, designed to fit into tight ceiling spaces